REPLACEMENT CERAMIC KIT FOR MIST MAKER (9 PCS)

HA03   REPLACEMENT CERAMIC KIT FOR MIST MAKER (9 PCS)

• Comes with replacement ceramic disc (membrane) & key tool for installation
• Black rubber edge around disc is for packaging only, remove it before installing
• The diameter of each ceramic disc is 2cm.

After operation the mist unit for some time, you may notice a decrease in the amount of mist produced or it may stop working altogether. At that time, you should either clean or replace the ceramic disc.

Follow the instruction below to change the disc:

1. Unplug the mist maker power and remove mist maker from water container, dry it with soft cloth.
2. Using the replacement disc/key tool, insert the key into the winding ring and turn counter clockwise.
3. Remove the filler piece(washer) and ceramic disc. IMPORTANT, note that there is a front and back of the ceramic. Be sure to re-install with the correct side(No black color ring side) facing up.
4. Clean mineral deposits on the ceramic with a soft cloth and re-install it or proceed to install a new ceramic disk in the reverse order of the above.
5. The inside area of the mist maker cavity must be completely dry before the parts are installed.

How to change the replacement ceramic discs in an Ultrasonic Mist Maker

Booster Pump Low Pressure Valve BP-LPV

AS11   BOOSTER PUMP LOW-PRESSURE VALVE BP-LPV

AC Adapter for Kemflo Bosster Pump

AS09   AC ADAPTER FOR KEMFLO BOOSTER PUMP

Soft Hose PU Pipe 3/8' x 50 meter (White) LLDPE

AS06   SOFT HOSE PU PIPE 3/8'X50M (WHITE) LLDPE

Replacement Water Tank for Humidifier TL3600 and NM5500

HA13    REPLACEMENT WATER TANK FOR HUMDIFIER TL3600 AND NM5500

AUTO WATER VALVE WITH FLOAT (HORIZONTAL) & PIPE FITTING for DIY ULTRASONIC HUMDIFIER

HA11   AUTO WATER VALVE WITH FLOAT (HORIZONTAL)

Size of Float: 9cm

(Adjustable float)

Diameter of water inlet: 1.5cm

HA12   PIPE FITTING (BLUE)

Diameter: 1.0cm (reducer)

FLOAT FOR DIY ULTRASONIC HUMIDIFIER (VERTICAL)

HA10   FLOAT FOR DIY ULTRASONIC HUMDIFIER (VERTICAL)

Size of float: 7.5cm x 4cm

(adjustable float)

Diameter of water inlet: 0.5-1.0cm

Mist Maker Transformer

HA09   MIST MAKER TRANSFORMER 36V/240V, 8.3A (300VA)

A solution for those ultrasonic humidifier and mist maker which have faulty transformer at a reasonable price.

Replacement Parts for Tay-Ring Taiwan Humidifier TL-3600

HA04   SMALL VANE 

HA05   BIG VANE 

HA06   DIFFUSER

HA07   FLOAT

Connectors and Nozzle Head

AS01    BRASS NOZZLE HEAD, NO.3

AS02    BRASS NOZZLE HEAD, NO.2

AS03    BRASS TEE

AS04    BRASS STRAIGHT

AS05    BRASS END

AS06    SOFT HOSE 3/8" (white) LLDPE 50 METER

Ultrasonic Mist Maker Maintenance Kits

HA08   NEST AMP MIST MAKER MAINTENANCE KIT (CERAMIC DISC D-05)

• Comes with replacement ceramic disc (membrane) & key tool for installation
• Black rubber edge around disc is for packaging only, remove it before installing

Follow the instruction below to change the disc:

1. Unplug the mist maker power and remove mist maker from water container, dry it with soft cloth.

2. Using the replacement disc/key tool, insert the key into the winding ring and turn counter clockwise.

3. Remove the filler piece(washer) and ceramic disc. IMPORTANT, note that there is a front and back of the ceramic. Be sure to re-install with the correct side(No black color ring side) facing up.

4. Clean mineral deposits on the ceramic with a soft cloth and re-install it or proceed to install a new ceramic disk in the reverse order of the above.

5. The inside area of the mist maker cavity must be completely dry before the parts are installed.

How to change the replacement ceramic discs in an Ultrasonic Mist Maker

Humidifier Top Cover

HA02    NEST AMP YH3600 HUMIDIFIER TOP COVER

Humidifier Skirt

HA01    HUMIDIFIER SKIRT