HA08 NEST AMP MIST MAKER MAINTENANCE KIT (CERAMIC DISC D-05)
- Comes with replacement ceramic disc (membrane) &
key tool for installation
- Black rubber edge around disc is for packaging only, remove it before installing
Follow the instruction below to
change the disc:
1.
Unplug the mist maker power and remove mist maker from
water container, dry it with soft cloth.
2. Using the replacement disc/key tool, insert the key into the winding ring
and turn counter clockwise.
3. Remove the filler piece(washer) and ceramic disc. IMPORTANT, note that there
is a front and back of the ceramic. Be sure to re-install with the correct
side(No black color ring side) facing up.
4. Clean mineral deposits on the ceramic with a soft cloth and re-install
it or proceed to install a new ceramic disk in the reverse order of the above.
5. The inside area of the mist maker cavity must be completely dry before the
parts are installed.
