Irrigation Timer

TM03   FARBEN IRRIGATION TIMER


Components
1. Water tap connection
2. Union nut
3. LCD dsiplay
4. Control key
5. Battery compartment
6. Hose connection
7. Screw cover

Technical data
Water connection:
21mm tap with 26.5mm thread
Hose connection:
13mm (1/2”) – suitable for all known plug-in systems
Water pressures:
Max. 10 bar/150 PSI
Water temperature:
Max. 40 degree Celsius
Irrigation medium:
Clear fresh water
Batteries:
2 x 1.5V Mignon AM/L 26

This irrigation computer must be used only for the control of irrigation systems in the domestic sector.


Connecting to the water tap
  • For connection you need a water tap with a 26.5mm thread.
  • Unscrew the union nut (2) to enable the water tap connection (1) to move freely.
  • Screw irrigation computer firmly onto the water tap by the tap connection. Turnthe appliance so that the control panel can be seen easily.
  • Screw union nut up tight.
  • Connect hose to hose connection (6).
Screw connection up by hand . Do not use a wrench.
Always keep screw cover (7) closed to prevent dirt from entering and incorrect operation.